How to use PS3Xploit on PS3 and Update to Rebug 4.81.2

Hi, folks in the article I would like to tell you the PS3 console PS3Xploit and update to Rebug 4.81.2. Since PS3Xploit has been out for several days, it is safe to say that it won’t block your console unless you need it to. This instructional guide is here to give a brief guide on the best way to hack your PlayStation 3 and install a standout amongst the most famous and highlight stuffed CFWs, which is Rebug 4.81.2.

Before going to PS3Xploit, you need to read this

• First of all, check your PS3 is hackable or not.
• All PlayStation Models are not hackable.
• Model 3xxx and 4xxx are not hacked by this process if you perform then maybe they blocked.
• FAT file consoles are completely safe for this process
• Slim 2xxx consoles mostly are safe.
• PS3Xploit only works with OFW 4.82, so do not try with the lower OFW version otherwise your console will be blocked.

To check whether your PS3 slim 25xxx console can be hacked or not, you can do the following:

• Download the minchkver.pup file. Extract the files.
• Take a USB drive with format FAT32. Make a folder named PS3, and in it make another folder UPDATE.
• Put PS3UPDAT.PUP file into the UPDATE folder.
• Take out USB drive from the PC and plug it into your PS3 console near to BD-drive port.
• Go to Settings->System Update->Update via Storage Media (USA Drive).
• You’ll get a prompt asking you whether you need to initialize the version checker, click OK.
• After that, if you PS3 degrade to 3.56 or below then it’s safe and you can proceed further.
• Rather than if your PS3 returns 3.60 or higher then stop the process because exploit may block your console.

Downloading and copying the necessary files

• The flsh.hex file – the file that’ll be flashed to your PS3 to enable it to install a CFW of your choice.
• The modified PUP file of Rebug 4.81.2. Try not to utilize a stock Rebug 4.81.2 PUP file since it won’t work or more regrettable yet block your console.

What you have to do now is this:

• Plug your USB drive into your PC.
• After you download “NOR_NAND_writer_release_1.0_PS3Xploit.ZIP”, extract it and search for ‘flsh.hex’. Copy that to the root directory of your USB drive.
• Copy and paste the “PS3UPDAT.PUP” to the PS3/UPDATE folder on your USB drive.
• Remove the USB drive from your PC and connect it to the right-most port on your PS3 (nearest to the Blu-Ray drive).

Perform the exploit on PS3 Console:-

• Since you have all the files prepared on your USB drive, you may continue to really run the exploit. So let’s start.
• Ensure the USB drive is in the right-most port of your PS3 closest to the BD drive.
• Turn on Wi-Fi or plug-in an Ethernet link.
• Open the internet browser (Network->Internet Browser).
• Presently, press Triangle and a menu will pop up on the right-hand side.
• Select Tools->Home Page->Use Blank Page.
• Press START and enter the following link: http://redthetrainer.com/ps3/norNandWriter/ (For NOR and NAND consoles)
  
• Read the instructions on the page and run the exploit.
• In the process that the exploit fails after 10 times, you’re protected to reload the page (it instructs you to do as such itself). With the optional step, it instantly worked.
• At the point when the exploit succeeds, do not touch your PlayStation 3 and let it shut-down by itself. IT SHOULD BEEP 3 TIMES.
• Now, boot up your PlayStation 3. Congratulations, you may now install a CFW
• You got a notice that a few files might be corrupted as your PS3 closed around itself because of the exploit, so simply press Cancel.

Installing the CFW Rebug 4.81.2 on PS3 Console

• Keep in mind the PUP file that you copied to the USB drive before? Utilize it now.
• Go to Settings->System Update->Update through Storage Media (USB drive).
• You’ll get a prompt asking you whether you need to install the CFW. Acknowledge the license terms and conditions and continue.
• Rebug 4.81.2 ought to get installed following a moment or moments.
• Your PS3 will reboot. To check if the CFW got installed, check if the boot logo changed to Rebug from PS3 (and the version number from Settings->System Information to 4.81)
• You’re finished! Now you enjoy your hacked PlayStation 3.

Finally, I hope this guide will make you more secure in installing CFW on your PS3. This is intended to be a compact version of the numerous guidelines found on various websites that somewhat vary with all the required data and an additional tip all over.

Additional read: RPCS3 Emulator

Summary:- Finally, I hope that you will easily understand this article and you can easily perform the PS3 console Rebug 4.81.2 process. Further, if you need any help then write to me I surely get back to you as soon as. Please like and share my Facebook page and also subscribe to push notification and get alerts on games and software for free.